Concepts Ideas Some effort180 min
Lyric video ideas: six ways to put the words in the world
Six ways to put lyrics in steam, receipts, projected light, paper, skin and typewriter ink, with hold times and 9:16 margins.
What do you need before you start?
You need a phone, a tripod, the lyrics typed out and about 3 hours for one idea. Start with a 30-second chorus. Get the look right on that before you shoot the rest of the song.
- A phone on a tripod, filming 9:16 at 25 fps
- The song on a second device, loud enough to sing along to
- The lyrics split into lines, each with a start time in seconds
- One lamp, ideally a 3200K tungsten bulb, or a window with 5600K daylight
- Whatever your idea needs: a mirror, a printer, a projector, card, a marker or a typewriter
Use a song you own or have permission to use. Only film hands, faces and places you have permission to film.
What makes words readable on screen?
Hold every line on screen at least as long as it takes to sing it, and add half a second. A line sung over 3 seconds stays up for 3.5. Cut to the next line on the first beat of the bar after the last word, never before it.
Contrast comes next. Pale words on a pale wall vanish on a phone, so go dark on light or light on dark, then check the frame at arm’s length.
For 9:16, keep words inside the middle of the frame. Leave about 10 percent clear at each side, 15 percent at the top and 20 percent at the bottom, where interface buttons usually sit. Keep each line to 6 or 7 words. If a lyric is longer, split it into two shots.
Which ideas use light and surfaces?
Steam, a projector and receipts put words on surfaces most people already own. Here are three versions.
- Steam on a mirror. Run a hot shower with the door shut, then write a line with a fingertip. Lock the phone off at eye level and shoot one line per take. Wipe and repeat. A 3200K lamp to one side makes the strokes glow.
- Projector on a wall. Project white text onto a plain wall in a dark room and stand the singer in front, so letters cross the face and shirt. For a neon look, use hot pink or cyan text on a black wall.
- Receipts. Print each line in a big monospace font on a long paper strip. Film each strip from above on a table, held for its sung length. Print your own. Never film real receipts with names or card numbers.
Which ideas use paper, skin and keys?
Cut-out letters, hands and a typewriter put the words in something you can touch. Here are three versions.
- Cut-out letters. Cut letters from coloured card and lay them on a table under a window at 5600K. Shoot from straight above and move the letters into place in small steps, taking a photo each time. Aim for 12 photos per second of footage.
- Handwritten on hands. Write a line across your own palms and fingers with a washable, skin-safe pen. Shoot a close-up and hold the hands still for the sung length. If someone else’s hands are in shot, ask them first.
- Typewriter. Borrow a typewriter and type each line live, tight on the paper. Cut so the last key lands on the last word sung. Record the key sound in the room as well.
How do you shoot it, step by step?
One idea takes about 3 hours from first sketch to a finished 30-second cut. Work in this order.
- Choose one idea and a 30-second chorus (10 minutes).
- Write the chorus as a shot list, one line per row, with start and end seconds (20 minutes).
- Build the set and test one line on your phone, checking contrast and 9:16 margins (30 minutes).
- Shoot each line three times at 25 fps. Hold the finished line still for its sung length plus half a second (60 minutes).
- Cut it in DaVinci Resolve, which is free. Lay the song down, place the best take on each line and watch at phone size (60 minutes).
What do you do when it goes wrong?
Fix contrast first, because unreadable words are the most common failure. Check one frame at phone size before you shoot the other lines.
- Words vanish: darken the background, move the lamp to the side, or change the colour of the writing. Reshoot that line.
- A line leaves before the singer finishes: freeze its last frame in the edit until the word ends.
- Steam fades mid-take: wipe the mirror, rewrite and shoot one line per take.
The usual mistakes are 10 words in one frame and cutting before the last word lands. If your energy runs out, cut the plan to the chorus only, 6 to 8 lines, and let the verses sit on a held shot of the set with no words.
How do you make the next one easier?
Leave the set standing and film every line in one sitting. Setting up twice costs more time than shooting.
Mark the tripod and lamp positions on the floor with tape, so a reshoot matches the first day. Name each file with its line number, such as line07_take2, so the edit is a matching job rather than a hunt. Keep your timing sheet as a template and reuse its columns for the next song.
Film three insert shots of the set as well, for example the pen, the paper and the room, each held 2 seconds. They cover any gap where a take failed, and they give the cut some air between lines.
Frequently asked questions
How long should lyrics stay on screen in a lyric video?
At least as long as it takes to sing the line, and add half a second. A line sung over 3 seconds should stay up for 3.5. Cut to the next line on the first beat of the bar after the last word.
What is the easiest lyric video idea to shoot on a phone?
Handwriting on your own hands needs a washable pen and a window. Receipts need only a printer and a table. Both can be shot in one sitting.
Do I need a projector to make a lyric video like this?
No. Steam on a mirror, receipts, cut-out letters, hands and a typewriter all work without one. A projector suits a dark room and a plain wall.
What are safe margins for lyrics in a 9:16 video?
Keep text about 10 percent in from each side, and clear of the top 15 percent and bottom 20 percent. Interface buttons usually sit in those zones. Check the frame on your phone before you shoot every line.
Can I use any song for my lyric video?
Only use a song you own or have permission to use. The same applies to faces, hands and locations in the shot. This is not legal advice.