Frame the Song
Menu
Skip to content

Concepts Craft Some effort270 min

Make a found footage music video without breaking copyright

A step by step guide to cutting a found footage music video from footage you own or may use, with a 4.5 hour plan, beat cuts and a shared grade.

Frame the Song Editors 5 min read

Which footage is safe to use

Safe footage is footage you own, footage you have written permission to use, and public domain or openly licensed material whose terms allow music videos. Three sources cover most projects.

  • Your own family footage, with a yes from every person who appears in it.
  • Public domain film, once you have checked that it is public domain in your country and not only in another.
  • Openly licensed clips, where the licence allows edits and use alongside music.

Read the licence on each clip’s own page. Some licences ask for credit, and some rule out commercial use. If a clip has no stated terms, treat it as not yours to use. The song needs the same care: use one you wrote, or one you have permission to put to picture. This is not legal advice.

What to have ready before you start

Have a cleared song, a folder, a spreadsheet and an editor open before you download a single clip. You need about 4.5 hours in all.

  • A song you own or have written permission to use, exported as a WAV.
  • A laptop with DaVinci Resolve. The free version handles most 8-bit formats up to 60 fps at Ultra HD.
  • A spreadsheet with four columns: clip name, source page, licence terms, date checked.
  • Ten minutes of your own footage if you have it, such as a phone clip of a window or a street you are allowed to film.
  • A folder per source, so no clip loses its paperwork.

Pick 24 or 25 fps now and set the timeline to it. Everything else gets converted to match.

The steps in order, with times

The job runs in six steps and takes about 4.5 hours.

  1. Clear the song and write down who owns it (15 minutes).
  2. Collect 40 to 60 clips and log every licence (60 minutes).
  3. Watch each clip and mark its best 8 to 10 seconds (45 minutes).
  4. Cut to the beat on a 25 fps timeline (90 minutes).
  5. Grade all the clips together (45 minutes).
  6. Export at 16:9 and save the spreadsheet beside the file (15 minutes).

Step 2 is where people lose an evening, so cap it. If a clip’s terms take more than 3 minutes to understand, drop the clip. A three minute song at 120 bpm has 90 bars. At two bars a shot that is 45 shots, which is why 40 to 60 clips is the right pile.

How to cut archive footage to the beat

Cut on the kick, and let shot length change with the section. At 120 bpm one bar lasts 2 seconds and one beat lasts half a second. In the verse, cut on the downbeat of every second bar, so each shot holds 4 seconds. In the chorus, cut every bar. In the last bar before the chorus, cut on every beat for four shots of half a second each.

Hold one shot for four bars in the bridge, which is 8 seconds, so the eye gets a rest. I nudge each cut two frames early at 25 fps, because a picture that arrives slightly ahead of the drum feels like it is on it. Bring one strong shot back every chorus so the chorus has a face. Add one of your own insert shots, such as a hand on a table, to tie the sources together.

How to grade mixed sources together

Match each clip’s blacks first, then lay one look over the whole timeline. Set every clip so its darkest area sits at about the same depth. Then add a single adjustment layer on top and make your colour grade there, so every clip gets the same treatment.

Crop everything into one frame. A 4:3 window inside a 16:9 timeline hides mixed aspect ratios, and a 2.39:1 letterbox does the same job with a cooler, wider feel. Push the whites toward a warm 3200K feel for a candlelit look, or toward 5600K for clean daylight. Add film grain at one strength across every clip, because grain hides the gap between a sharp phone clip and a soft old one. Black and white is the fastest unifier, and it suits a song that wants it.

Why re-filming a screen does not clear a clip

Pointing a camera at a screen does not change who owns the footage. The copy is still a copy of someone else’s work. Screen recording, flipping the image, slowing it to 50%, tinting it and cropping tight leave the ownership where it was.

If you want the look of a monitor in frame, play your own material on it. A family clip you have permission to use works well. Film it at 25 fps with the shutter near 1/50, which is a good place to start if you see flicker bars.

If you love a clip that is not cleared, ask the owner for a licence in writing, or replace it with something you shoot. Anyone recognisable in a clip has a say too, so get their yes before you use it.

When it stalls, and how to make it easier next time

When energy runs out, lock the chorus first. Sixty seconds of finished chorus gives you something to build outward from. If a licence is unclear, cut the clip and shoot an 8 second replacement yourself.

Three mistakes cause most of the damage.

  • Mixing 24, 25 and 50 fps clips without converting them, which makes motion judder.
  • Leaving licence notes until the end, when nobody remembers where a clip came from.
  • Using three minutes from one source, which reads as a clip show.

Next time, spend one 90 minute outing shooting 20 clips of 8 seconds each, with permission for every location and face. Keep a blank copy of your licence spreadsheet. A bank of your own shots means fewer clips to chase and fewer terms to read.

Frequently asked questions

Can I use public domain footage in a music video?

Often yes, but public domain status can differ between countries, so check each clip for the place where you will publish. Keep a note of where you found it and what the page says. This is not legal advice.

Is filming a film on a TV screen legal for a music video?

It does not remove the owner's copyright. Filming the screen makes a copy of their footage, so you still need permission. Play your own footage on the screen instead.

Can I use old family footage in my video?

Yes, if you own the footage and the people in it agree. Ask for a written yes, and ask a parent or guardian for anyone who is a child.

How many clips do I need for a three minute video?

Collect 40 to 60 clips. At 120 bpm a three minute song has 90 bars, so cutting every two bars needs about 45 shots, and the extra clips cover the ones you drop.

What frame rate should an archive music video use?

Pick 24 or 25 fps and set the timeline to it before you cut. Convert every other clip to match, including any 50 fps footage, so motion stays even.