Frame the Song
Menu
Skip to content
Answers Shot length

How long should each shot be in a music video?

Frame the Song Editors

Why the bar sets the length

A cut feels right when it lands on a bar line. Hold a shot for one bar, two bars or four, and the edit sounds like part of the song. Cut at a random second and the picture drifts against the drums.

The bar maths takes one line. In 4/4, a bar lasts 240 divided by the tempo in beats per minute. At 70 BPM that is 3.4 seconds. At 120 BPM it is 2 seconds. At 140 BPM it is 1.7 seconds, and one beat is 0.43 seconds.

Ranges for slow and fast songs

A ballad around 70 BPM suits shots of one to three bars, which is roughly 4 to 10 seconds. That is long enough for a slow push-in to finish its move. A close-up on a face can hold for two full bars, about 7 seconds, and the viewer keeps looking.

A fast track around 140 BPM suits shots of one or two bars, which is 1.7 to 3.4 seconds. Drop to a single beat, 0.43 seconds, only for a fill or a hit. Mid-tempo songs sit between the two, so a 100 BPM track at two bars gives 4.8 seconds a shot.

How to plan it step by step

  1. Find the tempo. Count the beats in 15 seconds and multiply by four.
  2. Divide 240 by that number. This is one bar in seconds.
  3. Choose a base length. Two bars for a ballad, one bar for a fast track.
  4. Shorten the chorus. If the verse runs at two bars a shot, try one bar in the chorus.
  5. Write the seconds beside each line of your shot list, so you shoot every setup long enough to cover the cut.

Shoot each take a bar longer than you plan to use. You need that handle at both ends to slide the cut a few frames either way. At 25 fps, a bar at 120 BPM is 50 frames.

When it does not work

Some songs have no steady click. A ballad with a loose, rubato piano pulls the bar around, so the maths gives you the wrong number. Cut on the vocal phrase instead. End the shot where the singer takes a breath.

Half-time songs fool the ear too. A trap track at 140 BPM often feels like 70, so it can carry the longer shots of a ballad. Try both lengths on the same verse and keep the one that does not feel rushed. The ballad guide shows how slow shots can carry a whole song, and the techno guide covers the fast end.

A common mistake

The usual error is one shot length for the whole song. Every shot at exactly two bars makes a metronome of the picture, and the viewer stops watching after the first chorus.

Vary the pattern on purpose. Let the verse breathe at two bars, tighten the pre-chorus to one, and hold a single wide shot across the last four bars of the outro. Also avoid cutting early to hide a weak take. If a shot is dull at 8 seconds, it will be dull at 4. Reshoot it with a better light or a move.