Why 25 is the safe default
Shoot at 25 fps if you are in the UK. Mains power runs at 50 Hz, so lamps pulse in step with it, and a 1/50 shutter at 25 fps keeps that pulse from showing up as bands on screen. Practical lamps, shop signs and office strip lights are far less likely to flicker.
24 fps is the other good choice. It is the cinema rate, and the gap between 24 and 25 is one frame a second. Pick one before the shoot, write it at the top of your shot list, and do not revisit it.
How to set it up
- Choose 25 or 24 and set every camera and phone to that rate.
- Switch off any auto or variable frame rate option. Phones love to change it for you.
- Set the shutter to double the frame rate. At 25 fps that is 1/50.
- Make the edit timeline the same rate before you import anything.
- Shoot slow-motion shots at 50 fps. On a 25 fps timeline they play at half speed with no further work.
- For slow-motion singing, play the track back at double speed on set and have the singer mime to it. Slowed to half speed in the edit, the mouth matches the real song.
The double-speed trick is hard on the singer. Keep those shots to two to four seconds, one chorus line at a time, and give them three or four takes. If you have not run playback on set before, rehearse it once with the speaker at normal speed first.
When 25 does not work
If you see dark bands rolling through the frame, the light is flickering against your shutter. Try 1/100 for 50 fps shots, or move the singer under a tungsten practical at 3200K, which pulses far less than cheap LED bulbs.
If a camera will not shoot 25 or 24, shoot at 30 and expect a conform. Resolve can retime clips onto a 25 fps timeline, but the motion will judder a little on pans. DaVinci Resolve is free, and the free version handles most 8-bit formats up to 60 fps at Ultra HD. If you shot 100 or 120 fps, you need the Studio version, which handles 10-bit video up to 120 fps.
The common mistake
The usual error is a mixed project. A friend sends a 30 fps phone clip, you drop it onto a 25 fps timeline, and one shot out of twelve stutters on every pan. The viewer cannot name the problem, but they feel it.
The second error is putting 50 fps footage on a 50 fps timeline. It plays at normal speed, so you get no slow motion at all. Keep the timeline at 25 and let the 50 fps clips stretch across it.
Check the frame rate of every clip before the edit starts. It takes two minutes and saves a re-shoot.